Spezifikationen

Funktionen

Referenzen

ACORN Gen2 with Rod suspension

Produktübersicht

A powerful, round high bay luminaire with its unique design and cooling system can provide light output up to 35 037 lm. It can be ordered with a wide range of optics, drivers, and sensors to meet the requirements of any project. You can choose between 5 mounting types: pendant, chain mounting, wire mounting, or two floodlight consoles. The reflector is available as an accessory. The model is adaptable to the smart luminaire.

Grundfarben

  • Black RAL9005
  • White RAL9016
  • RAL7035

Spezifikationen

V

220 - 240

Hz

50 - 60

W

50 - 270 1
30 - 200 2
30 - 150 3

lm

4902 - 45172 4

lm/W

Up to 167

K

3000 / 4000 5

°C

-40 up to +50 6

CRI

>70 / >80 / >90 5

Body: Die-cast aluminium

Dimming: DALI / 1-10 V / Bluetooth / Non dimmable

Sensor: Microwave / PIR / PIR + Daylight

Initial chromaticity: MacAdam 5

                                    MacAdam 3 (on request)

Lifetime: 100 000 h (L80B10) at Ta = 25 °C*

Warranty: 5 years

                   2 years (emergency configuration)

Optics: Symmetrical / Asymmetrical

Mounting: On rod

Human Centric Lighting: Available

Neto weight: Up to 6.12 kg

Class I
IP65 7
IK10
CE
UKCA
RoHS
Byggvarubedömningen Accepted
Ball proof test 8
Emergency lighting
Casambi
SundaHus assessment available 9
LED module replaceable by a professional
LED driver replaceable by a professional

1  With optics C01 / C02 / C03 
2  With optics D02 / D03
3  Emergency configuration
4  Lumen output indicated at 4000 K, CRI > 70
5  1800 / 2200 / 2700 / 3500 / 5000 / 5700 / 6500 K available on request along with other not listed CRI and CCT
6  Operating temperature differs depending on chosen output wattage
7  Emergency configuration IP40

8  Ball proof: tested according to DIN 57710-13
9  Check SundaHus web page for product assessment results

* This value is only informative and may change according to selected article. LED Lifetime is strongly depending from LEDs current and junction temperature – increase in LED current and luminaire power lead to increase of junction temperature and as consequence lifetime decrease. Thus, luminaire models with lower power, lower current (and lower junction temperature) will have higher lifetime than standard models. And high power and high current luminaire models may have negative lifetime deviation comparing to standard models. To receive precise value please contact VIZULO export representatives.

Total lumen output for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes.Lumen output indicated at 4000 K.

Dokumente herunterladen

Funktionen

Electronics

Light

Optics

en