Specifications

Features

References

Accessories

LUSCINIA Hanging

Product Overview

This luminaire is all about the feeling. Watch your outdoor space transform into an elegant and welcoming experience. Minimalist design without superfluous details attracts less unwanted attention, while still managing to inspire everyone around it. Sophisticated, yet casual. An instant timeless classic. Depending on your needs, we can provide a wide range of configuration options.

Basic colours

  • Silver RAL9006
  • Asphalt DB703
  • Black RAL9005
  • RAL7035

Specification

V

198 - 264 / 110 - 277 1

Hz

50 - 60

W

5 - 75

lm

476 - 11150 2

lm/W

95 - 158

K

2700 / 3000 / 4000 3

°C

-40 up to +50 4

CRI

>70 / >80 / >90 3

mm

343 x 156

Body: Die-cast aluminium

Dimming: DALI / 1-10 V / Midnight dimming / Step dimming / Mains dimming

Initial chromaticity: MacAdam 5

Lifetime: Eco 100 000 h (L90B10) at Ta = 25 °C* /

Standard / High density 100 000 h (L98B10) at Ta = 25 °C*

Warranty: 5 years

Installation: Pre-wired cable 30 cm 5

Mounting: On wire Ø 5 - 12 mm

Socket: NEMA Top / Zhaga Top and Bottom 6

Intelligent control: Stand-alone / Group / CMS

Sensor: Motion / Motion + Daylight / Daylight

Surge protection: 4 / 6 / 10 kV 7

Corrosion protection: Up to C5

Neto weight: Up to 4.8 kg

Max. wind load area, SCd: 0.09 m2

Class I
Class II
IP66
IK08
CE
UKCA
RoHS
cUL 8
Zhaga zdi4
ENEC
ENEC Plus
DarkSky Approved
Synergrid approved 8
International EPD System 9
LED module replaceable by a professional
LED driver replaceable by a professional

1  Maximum operating voltage, ENEC certificate voltage 198 - 264 V, UL certificate voltage 110 - 277 V
2  Lumen output indicated at CRI > 70
3  1800 / 2200 / 3500 / 5000 / 5700 / 6500 K available on request along with other not listed CRI and CCT
    Note! Only fixtures with CCT of 3000 K or lower are DarkSky approved!
4  Operating temperature differs depending on chosen output wattage
5  Other lengths available on request
6  Bottom Zhaga socket is not applicable with BL, BM and BJ LED modules (see the Technical specification file)
7  10 kV (L-N; L/N-PE) surge protection device available on request
8  Coming soon
9  EPD registration number: S-P-05893 (link to page)

* This value is only informative and may change according to selected article. LED Lifetime is strongly depending from LEDs current and junction temperature – increase in LED current and luminaire power lead to increase of junction temperature and as consequence lifetime decrease. Thus, luminaire models with lower power, lower current (and lower junction temperature) will have higher lifetime than standard models. And high power and high current luminaire models may have negative lifetime deviation comparing to standard models. To receive precise value please contact VIZULO export representatives.

Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes

Download Documents

Features

Electronics

Controls & Connectivity

Light

Optics

Exterior

Optical

Mounting

Controllers and sensors for smart systems

Terminal blocks and plugs

Cables

Sockets and caps for smart systems

en