Three different length options, two mounting types, one mission – to eliminate the difficult choice between style and function in your parking lots, pedestrian pathways, and other areas. The shorter version will make a fine decorative addition to any exterior, while the longer version can provide plenty of light for all kinds of landscapes. The minimalist design is built to last and offers some customization: you can choose the mount with or without the flange. Combine the ground-mounted HERON with our ROBIN surface-mounted lights to create a tasteful Scandinavian theme.
220 - 240
50 - 60
8 - 26
913 - 3350 1
106 - 135
2700 / 3000 / 4000 2
-40 to +40
>80 / >90 2
475 x 475 x 520
Body: Extruded Aluminium / Steel
Dimming: DALI / Midnight dimming / Step dimming / Mains dimming
Initial chromaticity: MacAdam 5
Lifetime: 100 000 h (L98B10) at Ta = 25 °C*
Warranty: 5 years
Installation: IP connector
Mounting: On flange
Intelligent Control: Stand-alone / Group / CMS
Sensor: Motion / Motion + Daylight / Daylight
Surge protection: 1 / 2 / 4 / 10 kV 3
Nature friendly: PC Amber / Red / 1800 K
Corrosion protection: Up to C5
Neto weight: Up to 4.8 kg 4
Up to 15 kg 5
1 Lumen output indicated at CRI > 70
2 1800 / 2200 / 3500 / 5000 / 5700 / 6500 K available on request along with other not listed CRI and CCT
3 10 kV (L-N; L/N-PE) surge protection device available on request
4 Aluminium version
5 Galvanized (steel) version
* This value is only informative and may change according to selected article. LED Lifetime is strongly depending from LEDs current and junction temperature – increase in LED current and luminaire power lead to increase of junction temperature and as consequence lifetime decrease. Thus, luminaire models with lower power, lower current (and lower junction temperature) will have higher lifetime than standard models. And high power and high current luminaire models may have negative lifetime deviation comparing to standard models. To receive precise value please contact VIZULO export representatives.
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes
Electronics
Controls & Connectivity
Light
Optics
Terminal blocks and plugs
Cables