198 - 264 / 110 - 277 / 90 - 305 1
50 - 60
5 - 190
487 - 28865 2
98 - 194 3
2700 / 3000 / 4000 4
-40 up to +50 5
>70 / >80 / >90 4
600 x 333 x 100
Body: Die-cast aluminium
Dimming: DALI / 1-10 V / Midnight dimming / Step dimming / Mains dimming
Initial chromaticity: MacAdam 5
Lifetime: Eco 100 000 h (L90B10) at Ta = 25 °C* /
Standard / High density 100 000 h (L98B10) at Ta = 25 °C*
Warranty: 5 years
Installation: Tool-less
Mounting: On bracket / wall / ceiling
Socket: NEMA Top / Zhaga Top and Bottom
Intelligent control: Stand-alone / Group / CMS
Sensor: Motion / Motion + Daylight / Daylight
Surge protection: 4 / 6 / 10 kV 6
Nature friendly: PC Amber / Red / 1800 K
Corrosion protection: Up to C5
Neto weight: Up to 7 kg
Max. wind load area, SCd: 0.04 m2
1 Maximum operating voltage, ENEC certificate voltage 198 - 264 V / 90 - 305 V, UL certificate voltage 110 - 277 V
2 Lumen output indicated at CRI > 70
3 This value depends from configuration and can reach even higher number when max efficient components are combined
4 1800 / 2200 / 3500 / 5000 / 5700 / 6500 K available on request along with other not listed CRI and CCT
Note! Only fixtures with CCT of 3000 K or lower are DarkSky approved!
5 Operating temperature differs depending on chosen output wattage
6 10 kV (L-N; L/N-PE) surge protection device available on request
7 EPD registration number: S-P-04348 (link to page)
8 Check SundaHus web page for product assessment results
* This value is only informative and may change according to selected article. LED Lifetime is strongly depending from LEDs current and junction temperature – increase in LED current and luminaire power lead to increase of junction temperature and as consequence lifetime decrease. Thus, luminaire models with lower power, lower current (and lower junction temperature) will have higher lifetime than standard models. And high power and high current luminaire models may have negative lifetime deviation comparing to standard models. To receive precise value please contact VIZULO export representatives.
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes
Electronics
Controls & Connectivity
Light
Optics
Optical
Mounting
Controllers and sensors for smart systems
Terminal blocks and plugs
Cables
Sockets and caps for smart systems
Fuses