ORRIS Basic
Przegląd informacji o produkcie
Classic style park luminaire, most used as Old town luminaire. Wide range of optics. It is also available with correlated color temperature CCT 2200 or 2700 K, which creates a significant advantage for luminaire used in inhabited places historical centers.
Podstawowe kolory
Specyfikacja
V
220 - 240
Hz
50 - 60
W
5 - 75
lm
400 - 8920 1
lm/W
80 - 128
K
2700 / 3000 / 4000 2
°C
-40 up to +50 3
CRI
>70 / >80 / >90 2
mm
425 x 425 x 816
Body: Die-cast aluminium
Dimming: DALI / 1-10 V / Midnight dimming / Step dimming / Mains dimming
Initial chromaticity: MacAdam 5
Lifetime: Eco 100 000 h (L90B10) at Ta = 25 °C* /
Standard / High density 100 000 h (L98B10) at Ta = 25 °C*
Warranty: 5 years
Spigot: ø 40 - 60 mm
Socket: NEMA Top / Zhaga Top
Intelligent control: Stand-alone / Group / CMS
Sensor: Daylight
Surge protection: 4 / 6 / 10 kV 4
Nature friendly: PC Amber / Red / 1800 K
Corrosion protection: Up to CX
Neto weight: Up to 7.6 kg
Max. wind load area, SCd: 0.09 m2
1 Lumen output indicated at CRI > 70
2 1800 / 2200 / 3500 / 5000 / 5700 / 6500 K available on request along with other not listed CRI and CCT
Note! Only fixtures with CCT of 3000 K or lower are DarkSky approved!
3 Operating temperature differs depending on chosen output wattage
4 10 kV (L-N; L/N-PE) surge protection device available on request
* This value is only informative and may change according to selected article. LED Lifetime is strongly depending from LEDs current and junction temperature – increase in LED current and luminaire power lead to increase of junction temperature and as consequence lifetime decrease. Thus, luminaire models with lower power, lower current (and lower junction temperature) will have higher lifetime than standard models. And high power and high current luminaire models may have negative lifetime deviation comparing to standard models. To receive precise value please contact VIZULO export representatives.
Technical parameters for final product can differ from typical data by 7% due to special conditions of LED manufacturing processes.
Pobierz dokumenty
Funkcje
Electronics
Controls & Connectivity
Light
Optics
Optical
Mounting
Controllers and sensors for smart systems
Terminal blocks and plugs
Surge protection devices
Sockets and caps for smart systems